Home » Electronic Measuring Instruments » Electronic Loads » Electronic Load » KIKUSUI PLZ-5W SR Series High-Capacity DC Electronic Loads

KIKUSUI PLZ-5W SR Series High-Capacity DC Electronic Loads

KIKUSUI
Supplier / Manufacturer: KIKUSUI
Model: PLZ6005W SR / PLZ10005W SR / PLZ15005W SR / PLZ20005W SR

Contact Us

PLZ-5W SR Smart-Rack High-Capacity DC Electronic Loads

The KIKUSUI PLZ-5W SR Series is a family of integrated rack-based DC electronic loads for test programs that require substantially more absorption capacity than a benchtop load.

Four rack-assembled models provide 6.0, 10.8, 15.6 and 20.4 kW nameplate load power. Each model operates over a published 1–150 V input range, with CC, CV, CR and CP load modes for flexible power-source evaluation.

KIKUSUI supplies these smart-rack systems assembled and tested, with standard LAN, USB and RS-232C communication. Optional GPIB and compatibility with Wavy sequence software support remote and repeatable testing workflows.

6–20.4 kWFour rated-power configurations
1–150 VPublished operating voltage range
CC / CV / CR / CPFour programmable load modes
LAN / USB / RS-232CStandard control interfaces

This series is a high-capacity complement to the existing PLZ-5W Series benchtop product page, whose published models cover 200 W, 400 W and 1,200 W.

The PLZ-5W SR is a power-absorbing electronic load, not an electricity-regenerating unit. Consider regenerative KIKUSUI load platforms when returning energy to the grid is a system requirement.

Four Smart-Rack Capacities

Select from 6.0, 10.8, 15.6 or 20.4 kW rated load power to align with test-system absorption needs.

Four Operating Modes

CC, CV, CR and CP modes support current-, voltage-, resistance- and power-controlled DC loading.

Fully Assembled Systems

Rack-integrated units are delivered assembled and tested, avoiding user-designed assembly of individual units.

Three Standard Interfaces

LAN, USB and RS-232C are standard interfaces; a GPIB interface is optional.

Programmable Sequences

Compatibility with KIKUSUI Wavy sequence software supports repeatable programmed load procedures.

Adjustable Measurement Ranges

Selectable ranges support work across different current and power conditions within the specified ratings.

High-Power DC Supply Validation

Load DC power supplies under controlled operating modes for output and regulation checks.

DC-DC Converter Evaluation

Apply programmed electrical loading to suitable high-power converter outputs.

Power Electronics Development

Characterize device behavior during changes in absorbed current or power.

Battery Discharge Research

Evaluate suitably protected DC battery packs and modules with a controllable load within rated operating limits.

Automated Production Test

Connect the electronic load to test controllers through standard communication interfaces.

Power System Burn-In

Apply sustained controlled DC loads for component and system stress procedures within thermal and electrical limits.

PLZ-5W SR Series Technical Specifications

Device classRack-integrated, non-regenerative DC electronic load
Published rated operating input voltage1–150 V DC
Control modesCC / CV / CR / CP
Product count4 standard smart-rack power models
Rated power range6.0–20.4 kW, model-dependent
Standard interfacesLAN, USB, RS-232C
Optional communicationsGPIB
Input supplySingle-phase AC 90–250 V auto-select, per KIKUSUI page
Optional softwareKIKUSUI Wavy sequence creation software compatibility
System deliveryFully assembled and tested
Current rating considerationManufacturer product matrix lists 1,200 A for 6 kW, 2,160 A for other models; current-setting ranges shown separately. Confirm 15.6/20.4 kW current limits.

PLZ-5W SR Model Comparison

SpecificationPLZ6005W SRPLZ10005W SRPLZ15005W SRPLZ20005W SR
Rated load power6,000 W10,800 W15,600 W20,400 W
Rated operating voltage1–150 V1–150 V1–150 V1–150 V
Rated current (product matrix)1,200 A2,160 A2,160 A*2,160 A*
CC H-range setting0–1,260 A0–2,268 A0–3,276 A0–4,284 A
CP H-range setting0–6,300 W0–11,340 W0–16,380 W0–21,420 W
Approx. system mass82 kg120 kg160 kg200 kg
Approx. control power consumption275 VA465 VA655 VA855 VA

*The manufacturer’s product-list table reports 2,160 A for both 15.6 and 20.4 kW units, while the detailed CC H-range settings are higher. These describe different values and must not be equated. Verify usable rated current at the actual load-voltage operating point before publishing a “maximum-current” headline or quoting.

Smart-Rack Selection, Interface and Product Family Notes

Rated power is not a simultaneous V × I guarantee: Select an operating point that is within the specified current, voltage and power envelopes. The rated operating-voltage range is 1–150 V.

Current rating QA: The KIKUSUI product table lists 2,160 A for the 10.8/15.6/20.4 kW models, while detailed selectable CC H ranges differ. Treat selectable setting range and rated operating current as distinct and confirm model-specific maximum current with KIKUSUI before quotation.

Control integration: LAN, USB and RS-232C are included. GPIB is optional. Verify software version compatibility and system controls before specifying an automated rack solution.

Related Denkei products: Compare the existing PLZ-5W 200–1200 W family for benchtop work, and the Electronic Load Testing solution for application-based selection.

No regeneration claim: PLZ-5W SR is a DC electronic load. Do not market it as a regenerative/bidirectional grid-returning system.