Home » Electronic Measuring Instruments » Electrical Safety & Insulation Testing » Winding Tester » ECG KOKUSAI DWIT-05 Impulse Winding Tester

ECG KOKUSAI DWIT-05 Impulse Winding Tester

ECG-KOKUSAI
Type: Winding Tester
Supplier / Manufacturer: ECG-KOKUSAI
Model: DWIT-05

The ECG KOKUSAI DWIT-05 is a high-resolution impulse winding tester for nondestructive coil and winding inspection. It combines 12-bit resolution, sampling up to 300 MHz, a 5 µH to 1 H inductance range, and advanced waveform evaluation for R&D and production quality control.

Industries & Applications:
R&DProduction TestingQuality Control
Contact Us

High-Resolution Impulse Winding Testing

The ECG KOKUSAI DWIT-05 is a new-generation impulse winding tester designed for nondestructive inspection of coils and wound components.

It applies an impulse voltage to a reference winding and the winding under test, then compares the resulting transient waveforms to evaluate winding condition and insulation-related differences.
12-bit / 300 MHz High-resolution waveform acquisition
5 µH to 1 H Supported inductance range
100 V to 5,000 V Applied-voltage range
16,384 points Maximum sampling data
In addition to conventional waveform-area and difference-area evaluation, the DWIT-05 provides measurement and judgment functions including peak-voltage stability, resonant frequency, and logarithmic decrement. A 10.1-inch WXGA color touch display, built-in data management, Ethernet, RS-232C, USB, and external control interfaces support both laboratory evaluation and production inspection workflows.
For broader winding-test selection, see the General Winding & Coil Test Solutions →

12-Bit / Maximum 300 MHz Waveform Acquisition

High-resolution 12-bit ADC circuitry with sampling up to 300 MHz enables detailed capture and evaluation of impulse-response waveforms.

Up to 16,384 Sampling Points

Selectable sampling data up to 16,384 points provides detailed waveform acquisition and allows waveform enlargement after testing.

5 µH to 1 H Inductance Range

Supports winding and coil testing across an inductance range from 5 µH to 1 H.

1 V Applied-Voltage Setting

Provides an applied-voltage range of 100 V to 5,000 V with 1 V setting steps for precise test-condition configuration.

Advanced Waveform Judgment

Supports Area, Differential Area, Flutter, and Laplacian evaluation together with peak-voltage stability, resonant-frequency, and logarithmic-decrement judgment.

Database-Based Test Management

Stores master waveforms, judgment conditions, test waveforms, and judgment values in the built-in database. Test data can also be reviewed remotely using compatible SQL client software.

10.1-Inch Touch Display

A 10.1-inch color TFT LCD with 1280 × 800 WXGA resolution provides touch-panel operation and detailed waveform viewing.

Flexible External Connectivity

Supports RS-232C, Ethernet, USB, external control I/O, trigger output, SD and SDHC storage for integration with test and inspection workflows.
Need dedicated partial-discharge evaluation? For applications where partial-discharge evaluation is a primary requirement, see the ECG KOKUSAI DWIT-05PD .
Motor winding inspection
Coil and wound-component testing
Transformer winding evaluation
Low-inductance coil testing
Winding insulation evaluation
R&D waveform analysis
Production quality inspection
Pass/fail winding comparison

DWIT-05 Specifications

Applied Voltage / Energy 100 V to 5,000 V / 0.12 J
Voltage Accuracy ±5.0%
Applied Voltage Step 1 V
Inductance Range 5 µH to 1 H
Resolution / Sampling Speed 12-bit / Maximum 300 MHz (20 steps)
Sampling Data 16,384 / 8,192 / 4,096 / 2,048 / 1,024 / 512
Display 10.1-inch color TFT LCD, 1280 × 800 WXGA, touch panel
Test Modes Impulse Test, BDV (PDIV) Test, Aging Test
Conventional Judgment Area, Differential Area, Flutter, Laplacian
Additional Judgment Peak Voltage Stability, Resonant Frequency, Logarithmic Decrement
Safety Emergency stop button and interlock
Master Waveform Memory 1,000 models (100 models × 10 pages)
External Interfaces RS-232C, external control I/O, Gigabit Ethernet, USB 2.0 host, trigger output
External Storage USB memory, SD card, SDHC card up to 32 GB
Operating Environment 0°C to 40°C, up to 80% RH, non-condensing
Input Power AC 100 V to 240 V ±5%, 50/60 Hz, 2 A
Dimensions 342 (W) × 188 (H) × 366 (D) mm, excluding protruding parts
Weight Approx. 9.8 kg