AIKOH RZE Series Digital Force Gauge

RZE Series Handheld Digital Push/Pull Force Gauges

The AIKOH RZE Series provides handheld digital force measurement across seven capacities for product development, assembly inspection, and repeatable push/pull testing.

The lineup covers 10 N to 1000 N rated capacities. The series provides ±0.2% full-scale accuracy, six selectable sampling periods between 1 and 250 ms, and five selectable LCD refresh rates.

USB output and analog output support recording or system integration, while compatible optional stands, software, printer connections, and control cables support more structured measurement workflows.

10–1,000 NRated capacity range across seven models
±0.2% F.S.Manufacturer-specified measurement accuracy
1–250 msSix selectable sampling periods
USB + ±2 VDigital and full-scale analog output options

A signed five-digit LCD and auto-power-off function improve routine use. A rechargeable nickel-metal hydride power system supports approximately 30 hours of use after a full charge under the manufacturer’s stated conditions.

Select model capacity and test fixtures based on maximum expected force and loading direction. Optional stands and cables should be specified separately.

Seven Force Capacity Options

Choose RZE-1 through RZE-100 with rated capacities of 10, 20, 50, 100, 200, 500, and 1000 N.

Full-Scale Force Measurement Accuracy

The RZE Series lists ±0.2% F.S. accuracy for compatible force measurements within the selected model range.

Selectable High-Speed Sampling

Choose 1, 5, 16, 50, 125, or 250 ms sampling periods to match test behavior and data-collection needs.

Adjustable Display Refresh

Select 1, 2, 5, 10, or 20 LCD display updates per second for responsive or steady readout.

USB and Analog Output

USB data output and ±2 V/F.S. analog output support recording, monitoring and compatible test equipment integration.

Handheld and Stand-Based Use

The rechargeable handheld unit can be paired with optional motorized stands, RZ-3000 software and supported printer/output cables.

Switch Actuation Force

Measure force required to operate electrical and mechanical switches.

Lever Operating Force

Compare pull or push forces in levers and compact mechanisms.

Door and Drawer Operation

Evaluate opening, closing, or sliding force with appropriate fixtures.

Peel and Separation Tests

Measure force during compatible film, adhesive, or component separation tests.

Component Strength Checks

Apply controlled tensile or compressive force to small assemblies or fixtures.

Production Quality Inspection

Perform periodic push/pull force checks for assembly consistency and incoming inspection.

RZE Series Model Comparison

Select the rated capacity appropriate for the expected test force and overload risk.

Specification RZE-1 RZE-2 RZE-5 RZE-10 RZE-20 RZE-50 RZE-100
Rated capacity 10 N 20 N 50 N 100 N 200 N 500 N 1000 N
Equivalent nominal kgf 1 kgf 2 kgf 5 kgf 10 kgf 20 kgf 50 kgf 100 kgf

The manufacturer lists minimum display increments of 0.001 N, 0.01 N and 0.1 N depending on model; confirm the model-specific increment before quoting. kgf is a converted display unit, not a separate force rating. Shared accuracy: ±0.2% F.S.

Common RZE Series Technical Specifications

Accuracy±0.2% of full scale
Selectable sampling period1, 5, 16, 50, 125, 250 ms
Display update rate1, 2, 5, 10, 20 times/s, selectable
DisplaySigned five-digit LCD
OutputUSB; ±2 V/F.S. analog output; supported printer and stand connections
Power supplyRechargeable nickel-metal hydride battery; MODEL-780 AC adapter rated 100–240 V AC
Typical operationApprox. 30 hours after full charge
Approximate weight375 g
Optional peripheralsRZ-3000 software; stands; printer; model-specific I/O cables

Options and accessory selections vary; verify cables and fixtures before quoting.