AIKOH 5401K Series Torque angle tester

Torque–Angle Measurement for Switches and Mechanical Components

The AIKOH 5401K Series evaluates torque and rotation angle for switches, knobs, key cylinders and other mechanical parts where controlled torsional loading is required.

The desktop configuration holds the specimen on the lower measuring side while the upper torque meter rotates. Fixtures and specimen alignment should be selected for the intended test method; confirm accessory compatibility with the manufacturer.

5 / 20 N·m Model-dependent maximum output torque
0–340° Adjustable test angle
0.2–1 RPM Test speed range
0.1° Angle display resolution

Choose MODEL-5401K/50 for 5 N·m or MODEL-5401K/200 for 20 N·m capacity. Both use the MODEL-1018 torque measuring amplifier and MODEL-4502K controller.

The series supports operating-force assessments, torsion tests and mechanical component evaluation with appropriately selected fixtures.

Two Torque Capacities

Select a 5 N·m or 20 N·m configuration based on the torque required by the specimen.

0–340° Angle Setting

Configure angular displacement within the manufacturer-specified test range.

Low-Speed Torque Testing

Both models provide controlled rotation at 0.2–1 RPM.

High-Resolution Angle Display

A rotary encoder provides 0.1° angle display resolution and 1° display accuracy.

Workpiece Alignment Options

Jigs and accessory alignment arrangements can be evaluated for the specimen; confirm compatibility before ordering.

Desktop Test Platform

The 140 mm Z-axis stroke and 350 × 320 mm table accommodate a range of fixture arrangements.

Rotary Switch Torque

Measure operating torque across the rotation of mechanical or electrical switches.

Knob Operating Feel

Compare torsional resistance of rotary knobs and controls.

Key Cylinder Evaluation

Investigate torque behavior in key-cylinder mechanisms using suitable fixtures.

Cap Opening Torque

Measure the rotational force involved in opening a cap or similar component.

Fastener Torque Testing

Assess screw-tightening torque or other controlled torsional loading.

Circuit Board Torsion

Evaluate the torsional behavior of boards and mechanical assemblies.

Specification5401K/505401K/200
Maximum output torque5 N·m20 N·m
Manufacturer-stated torque accuracy0.01 N·m0.01 N·m
Test speed0.2–1 RPM0.2–1 RPM
Angle setting0–340°0–340°
Angle display resolution0.1°0.1°
Angle display accuracy1°1°
Z-axis stroke140 mm140 mm
Rotation center to column120 mm120 mm
Table size (W × D)350 × 320 mm350 × 320 mm
Drive motorDC brushless motorDC brushless motor
Angle detectorRotary encoderRotary encoder
Torque measuring amplifierMODEL-1018MODEL-1018
ControllerMODEL-4502KMODEL-4502K
Dimensions (W × H × D)490 × 742 × 480 mm490 × 742 × 480 mm
Stand massApprox. 60 kgApprox. 60 kg
Power supplySingle-phase 100 VAC, 0.5 ASingle-phase 100 VAC, 1 A