AIKOH 1305K Small Desktop Load Tester

Compact 200 N Force Tester for Miniature Components

The AIKOH 1305K combines 200 N compression and tensile testing with fine force indication and linear displacement measurement for small electronic and mechanical parts.

This desktop force tester uses the MODEL-1016C measuring amplifier and a motor-driven stand. Test speed is adjustable from 2 to 60 mm/min, while a 5 N load cell provides minimum force indication of 0.001 N.

200 N Maximum compression and tensile force
0.001 N Minimum indication with a 5 N load cell
0.001 mm Displacement display resolution
2–60 mm/min Adjustable test-speed range

The linear gauge provides 0.001 mm displacement display resolution. The mechanical stroke is 150 mm, while the maximum displacement display range is 30.000 mm; these are separate specifications.

The optional V-103A CF card supports tactile-feel tests of tact and rubber switches. The 1305K is discontinued; Denkei Americas can help review the legacy specifications and discuss currently available alternatives.

200 N Compact Force-Testing Platform

Designed for controlled compression and tensile measurements on small electrical and mechanical components.

Fine Force Indication

Displays force in increments as small as 0.001 N when a 5 N load cell is installed; force accuracy depends on the selected load cell.

Linear Displacement Measurement

A linear gauge supports force-displacement evaluation with 0.001 mm display resolution and 0.05 mm display accuracy.

Adjustable Test Speed

Motor-driven operation with a 2–60 mm/min testing range and five-step or stepless speed adjustment.

Small-Part Test Access

Compact W330 × D150 mm test table and 77 mm test-center-to-column distance support small-specimen setups.

Optional Switch-Feel Measurement

The V-103A CF card allows switch actuation-feel testing; additional load cells and application-specific fixtures are optional.

Miniature Component Compression

Measure compressive force during mechanical evaluation of small parts and subassemblies.

Small-Part Tensile Testing

Perform pull-force tests on miniature components with a suitable holding fixture.

Tact Switch Actuation Testing

Assess switch actuation response using the optional V-103A switch-feel measurement card.

Rubber Switch Force Evaluation

Characterize the force response of compliant rubber-switch components.

Touch-Panel Load Measurement

Measure applied forces during touch-panel and press-operation evaluation.

Electronic Device R&D and Quality Control

Compare sample force behavior across prototypes, inspected batches or design variations.

Specification MODEL-1305K
Maximum Force 200 N (20 kgf)
Force Accuracy Depends on selected load cell
Force-Measuring Amplifier MODEL-1016C
Controller Built in
Test Speed 2–60 mm/min
Speed Adjustment Five steps or stepless
Mechanical Stroke 150 mm (AIKOH general catalog)
Maximum Displacement Display 30.000 mm (linear gauge)
Force Display Resolution 0.001 N with 5 N load cell
Displacement Display Resolution 0.001 mm
Displacement Display Accuracy 0.05 mm
Displacement Detector Linear gauge
Test Center to Column 77 mm
Table Size W330 × D150 mm
Drive Motor DC brushless motor
Dimensions W340 × H580 × D430 mm
Stand Mass Approx. 32 kg
Amplifier Mass Approx. 5.2 kg
Power Supply Single-phase AC 100–240 V, 0.5 A
Standard Configuration Tester, MODEL-1016C amplifier, one load cell, linear gauge
Options Additional load cells, jigs/fixtures, software, V-103A CF card, MODEL-0219 ON/OFF detector

Legacy-model specifications. MODEL-1305K is listed as discontinued by AIKOH. Confirm any current equivalent and test fixtures with Denkei before requesting an order.