AIKOH 1431K Series Large force tester

Heavy-Duty Force Testing for Compression, Tension and Break Strength

The discontinued AIKOH 1431K Series covers 50, 100 and 200 kN force-testing configurations for large components, mechanical assemblies and destructive strength evaluation.

Designed for large-workpiece testing, the 1431K platform uses a high-rigidity frame, a servo-motor drive and a precision ball-screw mechanism. A rotary encoder detects displacement while the MODEL-1016C amplifier provides force measurement and result display.

50 / 100 / 200 kN Three documented legacy force capacities
0.5–300 mm/min Test-speed range across the listed models
0.01 mm Displacement indication resolution
Force + Travel Controlled repeat and break-strength testing

Test sequences can be configured around force, displacement, maximum force or breaking conditions, including repeated, constant-force and step-force operations. Model-dependent speed selection and rotary-encoder displacement readout support repeatable comparisons between samples.

The 1431K/5000, /10000 and /20000 models are listed by AIKOH as discontinued. Contact Denkei Corporation Americas to review legacy specifications or to evaluate the separately specified current 1431K family. Safety covers and area sensors should be selected to match the actual test setup.

Heavy-Duty Load Capacity

Select among documented 50, 100 and 200 kN legacy configurations for larger parts and mechanical assemblies.

High-Rigidity Test Structure

A rigid mechanical platform supports compression, tensile and destructive strength evaluation.

Servo and Ball-Screw Drive

Servo-motor operation and precision ball-screw actuation provide controlled motion during testing.

Force and Displacement Control

Test routines can be configured for load-based and travel-based evaluation, including repeated sequences.

Break and Peak-Force Testing

Measure maximum and failure force during structural, material or component-strength testing.

Measurement and Safety Options

The legacy MODEL-1016C amplifier presents test results; protective equipment and fixtures depend on the application.

High-Load Compression Testing

Determine compressive force response of larger components using suitable loading platens.

Tensile Strength Evaluation

Perform pull tests on components and joints with appropriately rated grips and fixtures.

Break-Strength Testing

Record force at failure during destructive strength evaluation of assemblies or materials.

Bending and Flexural Evaluation

Apply a controlled load for bending tests when matched with application-specific fixtures.

Welded Joint Strength Testing

Evaluate load-bearing behavior of welded components using a suitable test arrangement.

Repeated Load and Durability Studies

Run controlled repeated-load sequences for engineering verification and quality comparisons.

Specification 1431K/5000 1431K/10000 1431K/20000
Maximum Force 50 kN (5,000 kgf) 100 kN (10,000 kgf) 200 kN (20,000 kgf)
Force Accuracy Depends on load cell Depends on load cell Depends on load cell
Test Speed 0.5–300 mm/min 0.5–300 mm/min 0.5–300 mm/min
Speed Adjustment 5 steps or stepless 15 steps or stepless 15 steps or stepless
Displacement Detector Rotary encoder Rotary encoder Rotary encoder
Displacement Resolution 0.01 mm 0.01 mm 0.01 mm
Displacement Display Accuracy 0.1 mm 0.1 mm 0.1 mm
Drive Mechanism Precision ball screw / servo motor Precision ball screw / servo motor Precision ball screw / servo motor
Force Amplifier MODEL-1016C (legacy) MODEL-1016C (legacy) MODEL-1016C (legacy)
Production Status Discontinued Discontinued Discontinued

Data for the legacy 1431K models are based on Denkei’s existing product listing. Do not substitute current 1431K specifications for 1431K without manufacturer confirmation. Actual fixtures, safeguards and force accuracy depend on configuration.