AIKOH 1320K Series Large desktop force tester

AIKOH ENGINEERING
Type: Force Tester
Supplier / Manufacturer: AIKOH ENGINEERING
Model: 1320VC / 1321VC / 1322VC / 1323VC / 1324VC / 1325VC

Contact Us

Large Desktop Force Testers for Compression, Tensile and Break Tests

The AIKOH 1320K Series covers 5 kN, 10 kN and 20 kN force capacities for compression, tensile, bending and break-strength testing of larger mechanical components.

Six legacy VC-series models pair a high-rigidity stand with the MODEL-1016C measuring amplifier. Their 800 mm columns and 360 mm column interval accommodate a range of larger test specimens and application-specific fixtures.

5–20 kN Available maximum force capacities
6 Models Force-only and force-displacement versions
800 mm Column length for larger samples
150 mm Mechanical stroke

The 1320, 1322K and 1324K provide force measurement, while the 1321K, 1323K and 1325K also provide rotary-encoder displacement indication. Test speed is 2–60 mm/min on the 5 kN and 10 kN models and 2–40 mm/min on the 20 kN models.

These VC-series models have been discontinued by AIKOH. For new projects, Denkei Americas can help identify a currently available force tester and review the required capacity, measurement functions and fixtures.

Three Maximum Force Capacities

Choose from 5 kN, 10 kN or 20 kN nominal maximum load configurations for different specimen strengths.

High-Rigidity Test Stand

The robust frame is suitable for compression, tensile and destructive break-force testing with compatible fixtures.

Force or Displacement Versions

Three models provide force-only readings; three add rotary-encoder displacement indication.

Room for Larger Test Samples

800 mm columns and 360 mm column interval support measurement of comparatively large parts.

Controlled Motorized Testing

A DC brushless motor and ball-screw mechanism provide adjustable test speeds with 150 mm stroke.

Optional Application Fixtures

Tensile grips, compression fixtures and bending jigs can be specified to match the workpiece and test method.

Compression Strength Testing

Measure compressive force behavior and failure force of components using suitable jigs.

Tensile Pull Testing

Evaluate tensile load response of parts and assemblies with compatible grips.

Break-Strength Measurement

Determine the maximum or breaking force during destructive mechanical evaluation.

Three-Point Bending Tests

Perform bending-load evaluations with the appropriate fixture and test setup.

Welded Joint Force Testing

Measure load capacity of welded specimens and joined mechanical assemblies.

Mechanical R&D and Quality Control

Compare force responses of prototypes and manufactured parts against defined test criteria.

Model Comparison

Specification 1320K 1321K 1322K 1323K 1324K 1325K
Maximum Force 10 kN 10 kN 5 kN 5 kN 20 kN 20 kN
Test Speed 2–60 mm/min 2–60 mm/min 2–60 mm/min 2–60 mm/min 2–40 mm/min 2–40 mm/min
Displacement Detector None Rotary encoder None Rotary encoder None Rotary encoder
Displacement Display No Yes No Yes No Yes
Display Accuracy — 0.1 mm — 0.1 mm — 0.1 mm

Shared Technical Specifications

Specification 1320K Series
Force Accuracy Depends on selected load cell
Force-Measuring Amplifier MODEL-1016C
Test-Speed Adjustment Five steps or continuous
Mechanical Stroke 150 mm
Displacement Resolution 0.01 mm (models with rotary encoder)
Column Length 800 mm
Column Interval 360 mm
Table Size 250 mm diameter; center M20 × 1.5
Drive Motor DC brushless motor
Driving Mechanism Ball screw
Dimensions W510 × H1220 × D400 mm
Stand Mass Approx. 120 kg
Power Supply Single-phase AC 100–240 V, 5 A
Fixtures Optional; selected for the sample and test method

The six 1320K–1325K models are discontinued. These are historical VC-series specifications, not specifications for the newer 1320K family. Fixture and replacement-model requirements should be confirmed separately.