Rugged Portable LED Stroboscope for Industrial Motion Inspection
The Sugawara S-1 is a multifunction portable LED stroboscope designed for rotational-speed measurement and visual inspection in demanding industrial environments.
Its IP54-compliant dustproof and water-resistant construction allows the S-1 to be used around dust and water droplets, while the built-in lithium-ion battery supports long-duration inspection without requiring a nearby power source.
IP54
Dustproof and water-resistant construction for industrial environments
30–360,000 FPM
Ultra-wide internal-trigger flash-frequency range
Up to 16 Hours
Long battery operation for extended field and production inspection
0.1–500 μs
Adjustable flash duration for brightness and motion sharpness control
In addition to internal flashing, the S-1 supports external triggering, phase shift, angle and time delay, frequency division, and slow-motion observation. Up to ten operating configurations can be stored for repeatable inspection conditions.
IP54 Industrial Construction
Dustproof and water-resistant construction supports inspection around dust and water droplets in production environments.
30–360,000 FPM Range
Ultra-wide internal-trigger frequency range supports measurement and observation of rapidly rotating and moving equipment.
Up to 16-Hour Battery Operation
The built-in lithium-ion battery enables extended portable operation without dependence on a nearby AC power source.
Adjustable Flash Duration
Flash duration can be adjusted from 0.1 μs up to 1% of the flash cycle, with a maximum duration of 500 μs.
External Trigger Operation
Supports synchronization to external voltage signals for production equipment and machine inspection.
Angle and Time Delay
External-trigger operation provides 0–359° angle delay and time-delay adjustment up to 2,000 ms.
Frequency Division
External signals can be divided by up to 1,000 for synchronization with machinery and encoder-based inspection processes.
Slow-Motion Observation
Adjustable apparent motion from -1.0 to +1.0 r/s helps operators observe repetitive movement and timing relationships.
10-Setting Memory
Up to ten flash-condition configurations can be saved for fast switching between recurring inspection requirements.
Printing Inspection
Inspection of color registration, alignment, faint printing,
omissions, blemishes, and other defects on moving printed material.
Paper & Film Inspection
Visual observation of continuously moving webs and surfaces
in paper, film, and converting processes.
Steel & Sheet Inspection
Surface inspection of sheet metal in rolling and processing equipment.
Textile Machinery
Spindle-speed measurement, yarn-balloon observation,
and loom timing adjustment.
Rotating Machinery
Rotational-speed measurement and visual inspection of motors,
shafts, fans, and other rotating components.
Industrial Field Inspection
Portable inspection in locations where dust, water droplets,
or limited access to AC power make conventional instruments less practical.
| Model | S-1 |
|---|---|
| Operation Modes | Internal Trigger / External Trigger / External Trigger Divide |
| Internal Trigger Range | 30–360,000 FPM |
| External Trigger Range | 0–36,000 FPM |
| Flash Duration | 0.1 μs to 1% of flash cycle, maximum 500 μs |
| Angle Delay | 0–359°, 1° resolution |
| Time Delay | 0.04–2,000 ms, 0.01 ms resolution |
| External Signal Division | Maximum division ratio: 1,000 |
| Encoder Input | Up to 1,000 pulses/revolution |
| Slow Motion | -1.0 to +1.0 r/s, 0.1 r/s resolution |
| Memory | 10 settings |
| Battery | Built-in lithium-ion battery |
| Battery Life | Up to 16 hours |
| Recharge Time | Approx. 2 hours with power OFF |
| Protection Rating | IP54 |
| AC Adapter | 100–240 VAC, 50/60 Hz |
| Dimensions | 223 × 126 × 164.5 mm |
| Weight | 1.7 kg |
Accessories
| Standard Accessories | AC adapter, operation manual |
|---|---|
| Optional Accessory | Connection cable |
