Home » Manufacturing / Processing / Inspection Equipment » Force & Mechanical Test Systems » Force Tester » AIKOH 1840K Series Large precision force tester

AIKOH 1840K Series Large precision force tester

AIKOH ENGINEERING
Type: Force Tester
Supplier / Manufacturer: AIKOH ENGINEERING
Model: 1840K, 1840VCT/200 / 1840VCT/500 / 1840VCT/1000 / 1840VCT/2000 / 1840VCT/5000

Contact Us

Precision Compression and Tensile Testing from 2 to 50 kN

The AIKOH 1840K Series is a servo-driven force tester family with five capacities from 2 to 50 kN for controlled compression, tensile, strength and displacement-based evaluation.

The series combines a rigid large-format test stand with an external MODEL-4502K controller and MODEL-1018 force-measuring amplifier. Testing speed varies by capacity, reaching up to 600 mm/min on 2 and 5 kN models.

2–50 kN Five maximum-force configurations
1–600 mm/min Test-speed envelope (model-dependent)
700–1,000 mm Mechanical stroke by model
MODEL-4502K Dedicated external test controller

A servo motor and rotary encoder provide controlled test travel and displacement readout. The platform supports repeated strength evaluations, compression and tensile testing, and bending at a specified displacement with suitable fixtures.

This page covers the 1840K Series with MODEL-4502K control. The separately available 1840KT Series uses built-in touch-panel settings and different speed specifications; confirm the intended controller and electrical service before specifying a system.

Five Load-Capacity Choices

Choose 2, 5, 10, 20 or 50 kN maximum force to fit the specimen and expected test load.

MODEL-4502K Test Controller

External controller supports operational setup for the 1840K family, separate from the touch-panel 1840KT line.

Servo-Driven Motion

Controlled testing from 1 mm/min up to the model-dependent maximum of 250, 300 or 600 mm/min.

Large Mechanical Stroke

700–1,000 mm of available stroke provides test travel for different sample dimensions.

Rotary-Encoder Displacement

Displacement monitoring supports force-versus-travel evaluation and tests at a prescribed displacement.

Configurable Test Equipment

Additional load cells, fixtures, software, column-extension and safety-cover options support tailored test setups.

Compression Strength Testing

Measure compressive load response and maximum strength of components using suitable platens.

Tensile Force Evaluation

Evaluate pull strength with appropriately rated grips and test fixtures.

Repetitive Load Testing

Compare component behavior across repeated controlled loading cycles.

Bending at Defined Displacement

Characterize bending force at a specified displacement with compatible jigs.

Mechanical Product Validation

Conduct prototype and design-verification tests of manufactured parts and assemblies.

Manufacturing Quality Control

Compare force and travel measurements across parts, lots and engineering specifications.

Specification 1840K/200 1840K/500 1840K/1000 1840K/2000 1840K/5000
Maximum Force 2 kN 5 kN 10 kN 20 kN 50 kN
Test Speed 1–600 mm/min 1–600 mm/min 1–300 mm/min 1–300 mm/min 1–250 mm/min
Stroke 700 mm 700 mm 1,000 mm 950 mm 950 mm
Center-to-Column Distance 175 mm 175 mm 175 mm 175 mm 200 mm
Controller MODEL-4502K MODEL-4502K MODEL-4502K MODEL-4502K MODEL-4502K
Force Amplifier MODEL-1018 MODEL-1018 MODEL-1018 MODEL-1018 MODEL-1018
Force Accuracy Depends on load cell Depends on load cell Depends on load cell Depends on load cell Depends on load cell
Speed Adjustment 5 steps or stepless 5 steps or stepless 5 steps or stepless 5 steps or stepless 5 steps or stepless
Drive Motor Servo motor Servo motor Servo motor Servo motor Servo motor
Displacement Detector Rotary encoder Rotary encoder Rotary encoder Rotary encoder Rotary encoder
Displacement Display Accuracy 0.1 mm 0.1 mm 0.1 mm 0.1 mm 0.1 mm
Test Table Ø300 mm, M20 × 1.5 Ø300 mm, M20 × 1.5 Ø300 mm, M20 × 1.5 Ø300 mm, M20 × 1.5 290 mm square, M20 × 1.5
Dimensions (W × H × D) 600 × 1,340 × 400 mm 600 × 1,340 × 400 mm 600 × 1,714 × 400 mm 630 × 1,650 × 410 mm 720 × 1,714 × 540 mm
Stand Mass Approx. 160 kg Approx. 170 kg Approx. 190 kg Approx. 270 kg Approx. 350 kg
Power Supply Single-phase AC 100/200 V, 5 A Single-phase AC 100/200 V, 10 A Single-phase AC 100/200 V, 10 A Single-phase AC 200 V, 10 A Three-phase AC 200 V, 10 A

1840K model figures are taken from AIKOH English product pages. They do not apply to 1840KT touch-panel models. Supply voltage, safety measures, available speed and accessories are model/configuration dependent; verify before quoting.