Home » Electronic Measuring Instruments » Force, Torque & Strain Sensors » Load Cell » AIKOH DUD Series Small & high performance load cell

AIKOH DUD Series Small & high performance load cell

Compact Stainless Steel Load Cells for Tension and Compression

The AIKOH DUD Series consists of compact, high-output load cells for measuring tensile and compressive forces in testing systems and mechanical fixtures.

Stainless steel construction provides corrosion resistance. Six models cover rated capacities from 500 N to 20 kN, allowing the sensor to be selected according to the force range required by the measurement setup.

500 N–20 kN Available rated capacities
2 mV/V Rated output, ±1%
0.15% R.O. Manufacturer-stated nonlinearity
150% R.C. Allowable overload

The DUD Series uses a 10 V recommended excitation supply and has specified performance characteristics for hysteresis, repeatability and temperature influence.

These load cells are suitable as force-sensing components in appropriately designed tensile, compression and mechanical evaluation systems. Final measurement performance depends on the instrumentation, mounting and calibration setup.

Bidirectional Force Sensing

One load cell design is used for both tension and compression measurement.

Six Rated Capacities

Select from 500 N, 1 kN, 2 kN, 5 kN, 10 kN and 20 kN variants.

Stainless Steel Construction

Corrosion-resistant stainless steel suits a range of instrumented test assemblies.

2 mV/V Rated Output

The manufacturer specifies a 2 mV/V rated output with ±1% tolerance.

Documented Sensor Performance

Nonlinearity is 0.15% R.O.; hysteresis and repeatability are each 0.1% R.O.

150% Rated Overload

Allowable overload is stated as 150% of rated capacity.

Tensile Force Measurement

Integrate a suitable DUD model into a fixture for tension loading and monitoring.

Compression Force Measurement

Use the sensor to measure compressive loading in a test or inspection setup.

Mechanical Strength Evaluation

Collect force data when mechanically evaluating test specimens and components.

Fixture Load Monitoring

Measure applied load in a suitably designed instrumented jig or fixture.

Research and Laboratory Testing

Use as a force-sensing element in laboratory measurement arrangements.

Production Quality Verification

Incorporate load measurement into an appropriately calibrated quality-control process.

SpecificationDUD Series
Rated capacity500 N–20 kN
Rated output2 mV/V ±1%
Nonlinearity0.15% R.O.
Hysteresis0.1% R.O.
Repeatability0.1% R.O.
Recommended excitation voltage10 V
Allowable excitation voltage15 V
Input/output resistance350 Ω ±2%
Insulation resistance≥1,000 MΩ
Temperature compensation range−10 to +70°C
Allowable temperature range−20 to +80°C
Zero-point temperature effect±0.01% R.O./°C
Output temperature effect±0.01% R.O./°C
Allowable overload150% R.C.
Cable length3 m
Cable terminationY terminal