Home » Manufacturing / Processing / Inspection Equipment » Force & Mechanical Test Systems » Torque Tester » AIKOH MODEL-5125K Series Desktop Torque Angle Tester

AIKOH MODEL-5125K Series Desktop Torque Angle Tester

MODEL-5125K Series Desktop Torque Angle Testing

The AIKOH MODEL-5125K Series measures and applies controlled rotational torque for the evaluation of switches, adjustable controls, threaded parts and other mechanical assemblies.

These compact desktop testers combine a powered rotary mechanism, rotary-encoder angle detection and the MODEL-1018 torque measuring amplifier. Operators can evaluate torque versus rotation conditions using suitable application fixtures and the specified test settings.

The MODEL-5125K provides 0.2–6 rpm test speed with a DC brushless motor. MODEL-5125KW increases the speed range to 0.1–20 rpm with a servomotor, while MODEL-5125KT adds touch-panel-based free speed settings.

5 N·mMaximum output torque across the series
0–340°Angle setting or continuous rotation
0.1°Angle display resolution
3 Models5125K, 5125KW and 5125KT

A 210 mm Z-axis stroke, 150 mm diameter table and 110 mm rotation-center-to-column distance support a range of component and fixture sizes. Select tooling and torque meter capacity for the actual device under test.

Torque accuracy is listed by AIKOH as “0.01 N·m”; confirm the applicable measurement method and calibration documentation when designing a specification-critical test.

5 N·m Torque Capacity

All three models have a published maximum output torque of 5 N·m for compatible rotary-component testing.

Rotary Angle Measurement

A rotary encoder measures angular position, with 0.1° display resolution and 1° published display accuracy.

Model-Specific Speed Control

MODEL-5125K: 0.2–6 rpm; MODEL-5125KW/KT: 0.1–20 rpm. The KT model offers free speed setting on its touch panel.

Integrated Torque Measurement

MODEL-1018 torque measuring amplifier and one torque meter are listed in the standard system configuration.

Adjustable Fixture Envelope

The 210 mm Z-axis travel and 150 mm round table make fixture integration possible for switches, caps and small assemblies.

Optional Software and Tooling

Additional torque meters, fixtures and software are listed as options; confirm suitability and availability for each test setup.

Rotary Switch Operation

Measure actuation torque and rotation-related feel of rotary switches or selector mechanisms.

Variable-Resistor Feel Testing

Characterize the rotational effort of adjustable electrical controls and similar components.

Cap Opening Torque

Apply and measure torsional force on bottle caps and compatible threaded closures using an appropriate fixture.

Fastener Tightening Evaluation

Evaluate tightening torque behavior in repeatable screw or fastener tests.

PCB and Assembly Torsion

Apply controlled torsion to boards and assemblies for mechanical response and structural evaluation.

Automotive Power Window Feel

Investigate rotational operating feel and load behavior of suitable automotive switch/actuator components.

MODEL-5125K Series Technical Specifications

Instrument classMotorized desktop torque angle tester
Maximum output torque5 N·m (0.5 kgf·m), all three models
Published torque accuracy0.01 N·m (manufacturer wording; see QA)
Torque measuring amplifierMODEL-1018
Torque angle detectorRotary encoder
Angle setting0–340° or continuous rotation
Angle display resolution0.1°
Angle display accuracy1°
Z-axis stroke210 mm
Rotation center to column110 mm
Table diameterØ150 mm
DimensionsW350 × H767 × D475 mm
Stand massApprox. 55 kg
Amplifier massApprox. 5.2 kg
Standard itemsTester, MODEL-1018 amplifier and one torque meter
Available optionsAdditional torque meter; application jig/fixture; software

MODEL-5125K Family Comparison

SpecificationMODEL-5125KMODEL-5125KWMODEL-5125KT
Maximum output torque5 N·m5 N·m5 N·m
Test speed0.2–6 rpm0.1–20 rpm0.1–20 rpm
Speed adjustmentFive steps or steplessFive steps or steplessFreely set on touch panel
Drive motorDC brushless motorServomotorServomotor
Angle display resolution0.1°0.1°0.1°
Supply ratingSingle-phase 100–240 VAC, 0.5 ASingle-phase 100–240 VAC, 0.5 ASingle-phase 100 VAC, 3 A

Confirm U.S. mains compatibility of MODEL-5125KT before quoting: AIKOH lists its power input as 100 VAC, 3 A, unlike the other two 100–240 VAC configurations. “Torque accuracy 0.01 N·m” is reproduced as the manufacturer labels it; do not reinterpret as guaranteed accuracy under all conditions.

Selection and Installation Notes

Model choice: MODEL-5125K suits slower rotations; MODEL-5125KW offers wider 0.1–20 rpm speed adjustment; MODEL-5125KT offers touch-panel speed setting. All share a published 5 N·m maximum torque.

Torque transducer and fixture: Confirm the supplied torque meter and fixture design for each specimen. Additional torque meters, jigs and software are separate selectable accessories.

Electrical input: The manufacturer separately lists MODEL-5125KT at single-phase 100 VAC; confirm an appropriate North American configuration before specifying or quoting.

Related product: See AIKOH 5401K Series for a different torque-angle tester family, and AIKOH 5127K Series when higher torque is required.