Ultra-High-Precision DC Resistance Measurement for Weld and Connection Quality Inspection
The HIOKI RM3545A is a precision DC resistance meter designed for accurate measurement of extremely low resistance values in EV battery connections, motor windings, electronic components, and automated production inspection systems. With 1 nΩ minimum resolution and up to 1 A measurement current, it supports detailed evaluation of electrical connection quality.
The RM3545A provides 13 measurement ranges from 1000 µΩ to 1000 MΩ, covering low-resistance welds, precision shunt resistors, connector contacts, and higher-resistance electrical components. Its four-terminal measurement method reduces the influence of test lead and contact resistance for accurate measurements.
The RM3545A series includes two configurations. The RM3545A-1 provides single-channel resistance measurement, while the RM3545A-2 supports installation of up to two optional Z3003 multiplexer units for a maximum of 20 four-terminal measurement channels or 42 two-terminal channels.
For larger multi-point inspection systems, the RM3545A supports compatible external HIOKI switching solutions. With an SW1001 switch mainframe, configurations can support up to 33 four-terminal channels, while an SW1002 configuration can support up to 132 four-terminal channels.
Advanced measurement capabilities include Offset Voltage Compensation (OVC), Pure Resistance (PR) mode, temperature correction, contact checking, low-power measurement, and comparator-based PASS/FAIL judgment. These functions help manufacturers identify resistance variations associated with welding defects, connection inconsistencies, and component quality.
Standard LAN, USB, RS-232C, and EXT I/O interfaces enable integration with automated testing systems. Measurement speeds can be as fast as 2.3 ms under specified conditions, while precision low-resistance testing in PR mode supports high-speed measurements from 21 ms.
The RM3545A includes a Z2001 temperature sensor. Measurement leads must be selected separately for the standard instrument configurations. The built-in Z3003 multiplexer is supported only on the RM3545A-2 model.






