Home » Industrial Automation » Industrial I/O & Signal Conditioning » Data Acquisition System » CONTEC DIO-0808LY-USB Isolated USB Digital I/O Terminal – 8 Inputs / 8 Outputs

CONTEC DIO-0808LY-USB Isolated USB Digital I/O Terminal – 8 Inputs / 8 Outputs

Legacy 8-Input / 8-Output Isolated USB Digital I/O Terminal

The CONTEC DIO-0808LY-USB is a discontinued USB digital I/O terminal providing eight opto-isolated digital inputs and eight isolated open-collector outputs for industrial monitoring and control. Designed for 12–24 VDC field signals, it enables USB-connected computers to interface with compatible switches, sensors, indicators, and control equipment.

Part of CONTEC's PC-HELPER Y Series, the DIO-0808LY-USB uses USB 2.0/1.1 connectivity and USB bus power, eliminating the need for a separate power supply for the terminal itself. Its compact architecture and removable screw-terminal connectors support integration into test benches, factory automation systems, and equipment monitoring installations.

8 DI / 8 DO Isolated digital input and output channels
12–24 VDC Industrial field signal compatibility
300 µs Maximum input and output response time
USB 2.0 Bus-powered computer connection

The input circuits are compatible with current-sinking outputs, while the output circuits use current-sinking open-collector transistors. Opto-coupler isolation helps separate external field wiring from the computer interface. Output protection includes surge voltage and overcurrent protection circuits.

Two 14-pin screw-terminal connectors provide access to the digital I/O channels. CONTEC provides Windows and Linux driver support, subject to the operating system and driver version used.

Product lifecycle notice: The DIO-0808LY-USB has been discontinued. Its designated successor is the DIO-0808LY2-USB, which retains the same digital input/output specifications while adding input interrupt support and a digital filter. Migration requires review of USB connector orientation, device identification, and driver compatibility.

Eight Isolated Digital Inputs

Provides eight opto-coupler isolated inputs compatible with current-sinking field signals at 12–24 VDC.

Eight Open-Collector Outputs

Includes eight isolated current-sinking open-collector outputs for interfacing with compatible external equipment.

USB Bus-Powered Operation

Uses USB 2.0/1.1 connectivity and obtains operating power from the computer's USB port without a separate terminal power supply.

Electrical Isolation and Protection

Provides opto-coupler isolation and output circuits with surge voltage and overcurrent protection.

Removable Screw-Terminal Wiring

Uses two 14-pin screw-terminal connectors for practical connection of industrial field signals.

Designated Successor Available

The DIO-0808LY2-USB replaces this discontinued model while preserving its basic digital I/O specifications and adding new functions.

Legacy Factory Automation Systems

Maintain existing USB-based digital signal connections in manufacturing and equipment control installations.

Equipment Status Monitoring

Read compatible switch, sensor, and equipment status signals through an industrial computer.

Production Test Fixtures

Interface test computers with digital signals in existing automated test and inspection fixtures.

Industrial Output Control

Control compatible indicators and external interface circuits through isolated open-collector outputs.

Laboratory Automation

Connect compatible digital instruments and peripheral devices to computer-controlled laboratory setups.

Equipment Modernization

Evaluate replacement with the DIO-0808LY2-USB when updating legacy hardware and device drivers.

SpecificationDIO-0808LY-USB
ManufacturerCONTEC
Product StatusDiscontinued
Successor ModelDIO-0808LY2-USB
Product TypeIsolated USB Digital I/O Terminal
SeriesPC-HELPER USB Y Series
Digital Inputs8 channels, 1 common
Input TypeOpto-isolated, current-sink compatible, negative logic
Digital Outputs8 channels, 1 common
Output TypeOpto-isolated open-collector, current sink, negative logic
Field Signal Voltage12–24 VDC
Maximum Output Rating35 VDC, 100 mA per channel
Input Response Time300 µs maximum
Output Response Time300 µs maximum
Isolation Voltage1,000 Vrms
USB InterfaceUSB 2.0 / 1.1
Terminal PowerUSB bus power
Connectors2 × 14-pin screw-terminal blocks
Supported SoftwareWindows and Linux drivers
Maximum Concurrent Units127, subject to system limitations
End of Repair ServiceJuly 13, 2032 (manufacturer-listed; subject to change)

The DIO-0808LY-USB is discontinued. The terminal is USB bus powered, but the external I/O circuits require appropriate field wiring and power. Confirm legacy driver compatibility before servicing an existing installation.