Home » Industrial Automation » Industrial I/O & Signal Conditioning » Data Acquisition System » CONTEC DIO-0404LY-WQ-US Wireless Digital I/O Terminal – 4 Inputs / 4 Outputs

CONTEC DIO-0404LY-WQ-US Wireless Digital I/O Terminal – 4 Inputs / 4 Outputs

Long-Range Wireless Digital I/O for Distributed Industrial Monitoring and Control

The CONTEC DIO-0404LY-WQ-US is an isolated wireless digital I/O terminal designed for transmitting industrial input and output signals over the Sub-1GHz wireless band. Featuring four opto-isolated digital inputs, four isolated open-collector outputs, and support for 915 MHz communication in the United States, it enables remote monitoring and control of distributed industrial equipment.

The terminal communicates with a compatible CONTEC Wireless I/O Ethernet gateway, allowing digital signals from remote equipment to be accessed through a PC network. Its long-range wireless architecture reduces the need for signal cable installation across large facilities.

4 DI / 4 DO Isolated digital I/O channels
915 MHz US Sub-1GHz wireless band
Approx. 1 km Wireless communication distance
-20 to 60°C Operating temperature range

The DIO-0404LY-WQ-US supports 12–24 VDC digital signals and provides four opto-coupler isolated inputs and four opto-coupler isolated open-collector outputs. Both input and output channels have a specified response speed within 200 microseconds.

Sub-1GHz wireless communication provides long-distance connectivity for monitoring and control equipment spread across industrial facilities. Multi-hop mesh technology automatically changes communication routes when a connection is interrupted, helping maintain network communication around obstacles.

Additional functions include digital input filtering to reduce incorrect signal recognition and configurable output behavior when wireless communication errors occur. Windows application development is supported through CONTEC's API-DIO (WDM) driver library.

The terminal operates from -20 to 60°C and can be installed on a DIN rail using an optional mounting bracket. A compatible Wireless I/O Ethernet gateway is required for operation and is not replaced by a standard Ethernet connection.

915 MHz Sub-1GHz Wireless Communication

Uses the US 915 MHz wireless band for long-range transmission of industrial digital input and output signals.

Four Isolated Inputs and Outputs

Provides four opto-coupler isolated digital inputs and four isolated open-collector outputs for 12–24 VDC signals.

Approximately 1 km Wireless Range

Supports long-distance wireless communication under suitable installation and radio conditions, reducing extensive signal wiring.

Reliable Multi-Hop Mesh Networking

Automatically adjusts wireless communication routes when network paths are interrupted, improving connectivity across distributed installations.

Digital Filtering and Output Control

Includes input filtering and configurable output patterns for communication error conditions.

Industrial Temperature and DIN Rail Installation

Supports -20 to 60°C operation and optional DIN rail mounting for industrial control cabinets and remote equipment locations.

Remote Equipment Monitoring

Collect digital status signals from equipment distributed across industrial facilities without dedicated signal cables.

Factory Automation

Connect remote switches, sensors, and compatible control devices to industrial monitoring and automation systems.

Large Facility Monitoring

Extend digital signal monitoring across warehouses, manufacturing plants, and other wide-area facilities.

Distributed Alarm Systems

Transmit digital alarm and equipment status signals between remote locations and centralized monitoring systems.

Infrastructure Monitoring

Monitor compatible digital signals from equipment located throughout industrial infrastructure installations.

Wireless I/O Network Expansion

Develop distributed digital I/O networks using compatible CONTEC Wireless I/O gateways and multi-hop communication.

SpecificationDIO-0404LY-WQ-US
ManufacturerCONTEC
Product TypeIsolated Wireless Digital I/O Terminal
Wireless TechnologySub-1GHz Wireless
US Frequency Band915 MHz
Wireless RangeApprox. 1 km, environment dependent
Network TechnologyMulti-hop / Mesh
Digital Inputs4 opto-coupler isolated channels
Input CompatibilityCurrent sink output
Digital Outputs4 opto-coupler isolated open-collector channels
Output TypeCurrent sink
Digital Signal Voltage12–24 VDC
I/O Response SpeedWithin 200 microseconds
Input FilterSupported
Communication Error Output ControlSupported
Required GatewayCompatible CONTEC Wireless I/O Ethernet Gateway (Master)
Windows DriverAPI-DIO (WDM)
Operating Temperature-20 to 60°C
MountingDIN rail with optional bracket

A compatible CONTEC Wireless I/O Ethernet gateway (Master) is required. The 915 MHz frequency band applies to the US model. Wireless communication distance depends on obstacles, antenna installation, interference, and environmental conditions. The 12–24 VDC value refers to digital I/O signal compatibility, not a verified terminal power supply rating.