HDMI · DisplayPort · Protocol · Video Generation
Explore ASTRODESIGN solutions for HDMI signal generation, protocol analysis, automated source testing, DisplayPort, and multi-interface video validation.
Start with the device or interface behavior you need to test, then select the generation, analysis, or automated validation platform that fits your workflow.
FIND YOUR SOLUTION
Choose the signal-generation, protocol-analysis, source-testing, or multi-interface workflow that best matches your development requirement.
HDMI video signal generation
Generate repeatable HDMI video signals for display development, sink-device evaluation, high-resolution video testing, and HDMI interface validation.
Recommended for this solution
Compact HDMI 2.1 signal generator supporting FRL and TMDS workflows for R&D, quality assurance, and production-oriented display testing.
View VG-887
Modular digital video generator for configurable HDMI and other professional video-interface testing environments.
View VG-879-B
Configurable generator and analyzer platform that can support HDMI testing according to the installed interface board and configuration.
View LS-8500HDMI interface and protocol validation
Analyze HDMI signal behavior, protocol information, link status, HDCP, EDID, SCDC, audio, and related communication during source, sink, and repeater development.
Recommended for this solution
HDMI 2.1 protocol analyzer supporting FRL and TMDS signal analysis, HDCP, EDID, SCDC, DDC/CEC monitoring, and HDMI 2.1 CTS pretest workflows.
View VA-1847-AAutomated HDMI source validation
Automate HDMI source-device inspection and quality-control workflows using repeatable measurements, protocol verification, link-training tests, and externally controlled test sequences.
Recommended for this solution
HDMI 2.1 source tester designed for automated measurement and analysis through external PC control in production and quality-control environments.
View VA-1849-CMulti-interface display validation
Extend display and video-interface evaluation beyond a single HDMI workflow using configurable platforms for DisplayPort and other professional video interfaces.
Recommended for this solution
Modular signal-generation platform supporting configurable video interfaces including HDMI, DisplayPort, SDI, and V-by-One HS depending on the installed units.
View VG-879-B
Flexible generator and analyzer platform supporting HDMI, DisplayPort, and MIPI configurations through selectable interface hardware and functionality.
View LS-8500HDMI & Display Test Workflow
Display-interface testing can require several different functions. Separate signal generation, protocol analysis, automated source inspection, and multi-interface validation before selecting the appropriate platform.
HDMI & Display Interface Testing
HDMI and display-interface validation can involve several different test layers: generating known video signals, analyzing protocol and link behavior, automating source-device inspection, or validating products that support multiple video interfaces. Selecting the correct test platform starts with the DUT role and the behavior that must be measured or reproduced.
Displays, televisions, monitors, AV equipment, and other HDMI sink devices commonly require repeatable video generation across resolution, frame rate, color format, and link configurations. A generator provides a controlled source for functional evaluation, image verification, debugging, and production-oriented display testing.
Source, sink, and repeater development may require visibility into FRL or TMDS operation together with EDID, SCDC, HDCP, DDC, CEC, audio, and related interface behavior. Protocol analysis helps isolate interoperability issues that cannot be diagnosed from the displayed image alone.
HDMI source devices can require repeatable automated inspection of output behavior, protocol information, link training, and measurement results. Externally controlled test platforms are useful when the same verification sequence must be reproduced across development, quality-control, or production environments.
Products that combine HDMI with DisplayPort or professional video interfaces may benefit from a modular or configurable platform rather than separate instruments for every interface. Define the required interface hardware, signal direction, formats, and analysis functions before selecting the platform.
Use a signal generator when the DUT is primarily a display or sink device. The generator supplies a repeatable HDMI or video stimulus so the DUT can be evaluated under controlled timing and format conditions.
Use a protocol analyzer when the requirement is to inspect what is happening on the HDMI interface itself. This is especially relevant for source/sink interoperability, link negotiation, FRL or TMDS behavior, EDID exchange, content protection, and control-channel debugging.
Use a source tester or externally controlled analyzer when the same measurement sequence must be executed repeatedly. Automation can improve consistency when validating multiple units or running quality-control and production tests.
A configurable platform is appropriate when the lab must support HDMI, DisplayPort, or additional professional video interfaces. Confirm the required interface modules and functions for the actual system configuration.
| Selection Factor | What to Define | Typical Test Direction |
|---|---|---|
| DUT role | Source, sink/display, repeater, or multi-interface device | Determines whether generation, analysis, or source testing is primary |
| Interface | HDMI, DisplayPort, or additional professional video interfaces | Defines required interface hardware and platform configuration |
| HDMI link requirement | TMDS, FRL, and applicable HDMI-generation requirements | Determines generator/analyzer capability needed for the link under test |
| Protocol visibility | EDID, SCDC, HDCP, DDC/CEC, audio, link status, or related information | Points toward protocol-analysis workflows |
| Video requirement | Resolution, frame rate, color format, and required test patterns | Defines signal-generation and display-validation requirements |
| Automation | Manual R&D use, scripted validation, QC, or production inspection | Determines need for external control and repeatable test sequences |
| Validation scope | Functional image test, interface debugging, protocol analysis, or end-of-line inspection | Prevents selecting a platform that addresses only one layer of the problem |
A signal generator creates a controlled HDMI stimulus for testing a sink or display device. A protocol analyzer observes and analyzes interface behavior between HDMI devices. They solve different parts of the validation problem.
A source tester is appropriate when an HDMI source device must be checked repeatedly using defined measurement or inspection sequences. This is useful for automated validation, quality-control, and production-oriented workflows.
HDMI test requirements depend on the link modes used by the DUT. Select equipment around the actual link behavior that must be generated, observed, or validated rather than around resolution alone.
A configurable platform is useful when the same development environment must support HDMI together with DisplayPort or other professional video interfaces. Confirm the required interface modules, generation or analysis direction, and supported workflow before configuration.
Provide the DUT type, whether it is a source or sink, required interfaces, HDMI link mode, resolution and frame-rate targets, protocol items to inspect, automation requirements, and whether the system must support interfaces other than HDMI.
Application Support
Share your DUT type, interface, signal direction, HDMI link requirement, video format, protocol-analysis need, and automation scope. Denkei Corporation Americas can help narrow the appropriate ASTRODESIGN test workflow and platform.
Discuss Your Application
