ONO SOKKI CF-4700A FFT Comparator

Automated Sound and Vibration Inspection with FFT-Based OK/NG Judgment

The ONO SOKKI CF-4700A FFT Comparator is designed for automated production-line quality inspection based on sound and vibration frequency analysis. It identifies abnormal frequency components and performs OK/NG judgments to help detect defects in motors, bearings, transmissions, and mechanical assemblies.

Using FFT spectrum analysis, the CF-4700A evaluates measured sound or vibration against configurable judgment criteria. Its standard block comparator supports up to 20 judgment blocks, allowing different frequency bands and signal levels to be evaluated independently.

40 kHz Maximum FFT analysis frequency range
20 Blocks Configurable OK/NG judgment areas
1 Channel Sound or vibration signal input
PLC Integration Digital inputs and open-collector judgment outputs

The block comparator offers six judgment methods, including level, peak level, peak maximum, inside maximum, partial overall, and area content rate. A judgment assist function helps establish inspection thresholds by comparing measurement data from acceptable and defective products.

Optional functions expand the system beyond frequency-level comparison. The CF-0472 Shape Comparator evaluates waveform and spectrum shape, while the CF-0471 Tracking Function supports rotational-speed-dependent vibration analysis. The CF-0473A Amplitude Modulation Component Extraction Function helps identify abnormal sounds and vibrations with periodic amplitude fluctuations, including rattling, chattering, and bearing-related vibration.

The CF-4700A supports compatible accelerometers and microphones through its built-in constant-current sensor power and TEDS recognition. Measurement data and setup conditions can be stored locally or exported through supported USB and SD storage devices.

For factory automation, digital inputs and open-collector outputs provide control and individual judgment results to PLC-based inspection systems. Standard LAN and RS-232C interfaces support remote operation, communication, and measurement data management.

The global manufacturer documentation specifies 24-bit A/D conversion, an 8.4-inch color touch display, and a 40 kHz real-time analysis capability. Regional documentation contains different specifications; confirm the exact configuration supplied for the intended market.

FFT-Based OK/NG Quality Inspection

Evaluates sound and vibration frequency spectra against configurable thresholds to identify abnormal frequency components during automated production inspection.

Up to 20 Judgment Blocks

Supports up to 20 independently configurable block judgment areas with six comparison methods for evaluating signal levels and spectral characteristics.

Optional Shape and Tracking Analysis

Optional CF-0472 shape comparison and CF-0471 rotational tracking enable waveform-based inspection and evaluation of rotating machinery across changing speeds.

Amplitude Modulation Component Extraction

The optional CF-0473A function extracts periodic variations in sound or vibration amplitude, supporting detection of rattling, chattering, and bearing abnormalities.

Built-In Sensor Power and TEDS Support

Provides constant-current sensor excitation and TEDS recognition for compatible accelerometers and microphones, simplifying sensor setup and calibration.

PLC Connectivity and Data Management

Offers digital control inputs, open-collector OK/NG outputs, LAN, RS-232C, and removable storage for integration into automated production inspection systems.

Electric Motor Noise Inspection

Analyze abnormal sound and vibration components produced by electric motors during manufacturing quality inspection and end-of-line testing.

Bearing Defect Detection

Evaluate bearing vibration signatures and characteristic frequencies associated with mechanical damage using compatible accelerometers and optional envelope analysis.

Automotive Component Inspection

Perform FFT-based OK/NG inspection of automotive motors, door mirror actuators, alternators, and other mechanical components.

Transmission and Gear Noise Testing

Analyze vibration and noise components associated with rotating shafts and gear meshing, using optional rotational tracking for speed-dependent evaluation.

Metal Component Crack Inspection

Compare the frequency spectra of impact-generated sounds to support detection of cracks and other defects in suitable cast or metallic components.

Automated Production-Line Quality Control

Integrate sound and vibration judgments with PLC-controlled inspection systems for repeatable pass/fail sorting and production quality verification.

Specification CF-4700A
Product TypeFFT Comparator
Input Channels1 channel
Input ConnectorBNC
Input ConfigurationSingle-ended, isolated
Input Impedance1 MΩ ±0.5%, 100 pF or less
Input CouplingAC / DC
Input Voltage Ranges1 Vrms / 31.62 Vrms
Maximum Rated Input Voltage30 Vrms (42.4 Vpeak)
Sensor ExcitationCCLD, +23 to +26 V / 4 mA ±25%
TEDS SupportIEEE 1451.4 Ver. 0.9 / Ver. 1.0, compatible accelerometers and microphones
Frequency Analysis Range1 Hz to 40 kHz
Real-Time Analysis40 kHz, up to 16,384 points with internal sampling
A/D Converter24-bit delta-sigma, global manufacturer specification
Dynamic Range110 dB or greater under specified analysis conditions, global manufacturer specification
FFT Calculation32-bit floating-point
Maximum Sampling Points16,384
Maximum Analysis Points6,400
Window FunctionsRectangular, Hanning, Flat-top
Overlap ProcessingMAX, 75%, 66.7%, 50%, 25%, 0%, user-defined
Frequency-Domain AnalysisPower spectrum, Fourier spectrum, 1/1 octave and 1/3 octave
External Trigger InputBNC, ±12 V
External Sampling InputBNC, ±12 V
Display8.4-inch TFT color touch panel, 800 × 600 pixels
Specification CF-4700A
Judgment ModesContinuous / Single
Standard ComparatorBlock Comparator
Maximum Judgment Blocks20
Block Judgment MethodsLevel, Peak Level, Peak Max, Inside Max, Partial Overall, Area Content Rate
Judgment AssistAvailable, using differences between reference OK and NG measurement data
Optional Shape ComparatorCF-0472, up to 20 judgment lines
Optional Tracking FunctionCF-0471
Optional Amplitude Modulation AnalysisCF-0473A
Individual Judgment OutputsUp to 5 selected blocks or shapes
Automatic Data StorageNG results or all measurement results
Judgment Timer0 to 255 seconds, 1-second increments
Measurement Data CapacityUp to 9,990 stored data items
Panel Condition MemoryUp to 50 settings
Storage DestinationsInternal storage, USB memory, SD card
Data FormatsDAT, TXT, BMP, TRC

Specification CF-4700A
LAN10BASE-T / 100BASE-TX / 1000BASE-T
RS-232C1,200 to 115,200 bps
USB Ports2, USB 3.0
SD Card Slot1, SD / SDHC / SDXC, up to 128 GB with supported media
Digital Control Inputs9 inputs plus common
Status Outputs4 isolated open-collector outputs: BUSY, OK, NG, ERROR
Individual Comparator Outputs5 open-collector outputs plus common
Open-Collector Output Rating30 V maximum, 25 mA sink maximum
Power Supply16 V DC, 3.3 A
AC Adapter Input100 to 240 V AC, 50/60 Hz
Power Consumption65 VA maximum; up to 150 VA when charging the optional backup battery
Operating Temperature0 to 40°C
Operating Humidity20 to 80% RH, noncondensing
Storage Temperature-10 to +50°C
Dimensions220 W × 185 H × 220 D mm, excluding protrusions
MassApprox. 2.8 kg without options
CoolingNatural air cooling, fanless
Manufacturer-Listed ComplianceCE marking

Specifications are based on ONO SOKKI's detailed global CF-4700A documentation. The U.S. Ono Sokki website lists different A/D resolution, dynamic range, display size, real-time analysis capability, dimensions, and mass. Confirm the exact U.S.-supplied hardware and revision with the manufacturer before publication or quotation.

Dynamic range is specified under defined FFT analysis conditions and should not be interpreted as a guaranteed value for every measurement configuration. Shape comparison, rotational tracking, amplitude modulation component extraction, and power backup are optional functions. Compatible microphones and accelerometers are selected separately.


Model Description
CF-0471Tracking Function for rotational-speed-dependent analysis
CF-0472Shape Comparator Function for waveform and spectrum comparison
CF-0473AAmplitude Modulation Component Extraction Function with band-pass, envelope, and monitoring functions
CF-0478APower Source Backup Function with rechargeable battery
CF-0470AEEnglish Reference Guide
NP-3000 SeriesCompatible accelerometers with built-in preamplifier, depending on model
MI SeriesMeasurement microphones and associated preamplifiers

Optional software functions, sensors, cables, and accessories are not necessarily included with the standard CF-4700A. Verify license requirements, sensor compatibility, and regional availability before quotation.