Home » Environment / Evaluation / Testing Devices » Vibration & Shock Test Systems » Shock Test System » KOKUSAI HST150/60 Acceleration and Deceleration Dual Shock Tester

KOKUSAI HST150/60 Acceleration and Deceleration Dual Shock Tester

Servo-Driven Acceleration and Deceleration Shock Testing

The KOKUSAI HST150/60 dual shock tester combines controllable acceleration-type shock and conventional deceleration-type impact testing for repeatable component evaluation.

The system draws on KOKUSAI servomotor motion-control technology to provide low-inertia, high-torque positioning. Acceleration shock tests can be programmed across a range of stated impact accelerations and pulse durations.

1–50 GPublished acceleration shock range
5–100 msPublished acceleration pulse-duration range
150 GMagnitude of stated deceleration peak (negative polarity)
Dual modeAcceleration and deceleration shock operation

For deceleration shock testing, the manufacturer describes use of a plastic programmer and SLED-style operation. Appropriate pulse shapes and calibration depend on tooling, specimen mass and test setup.

This listing specifically covers the dual acceleration/deceleration tester. KOKUSAI also lists an HST150/60 impact-type configuration within the HST Series; specifications on those pages should not be combined without confirming they refer to the same supplied machine.

Dual Shock Test Modes

Support acceleration-style and deceleration-style mechanical shock test sequences.

Low-Inertia Servo Motion

High-torque low-inertia motion control supports fast, precise programmed movements.

Programmable Acceleration Profiles

Use stated acceleration test levels of 1 G to 50 G and durations of 5 to 100 ms.

High-Magnitude Deceleration

Manufacturer lists a -150 G deceleration pulse with a source duration shown as “-11 ms”; duration is treated as an approximately 11 ms magnitude pending confirmation.

SLED-Style Testing

Use a suitable programmer and fixture setup to generate defined deceleration events.

Repeatable Product Evaluation

Develop controlled test sequences for engineering comparison and validation.

Automotive Component Shock Testing

Check mechanical and electrical component response during prescribed shock tests.

Acceleration Pulse Evaluation

Examine product behavior under defined positive-acceleration shock profiles.

Deceleration Impact Testing

Reproduce braking/impact-type events using a suitable deceleration programmer.

EV Battery Subsystem Research

Investigate battery-related assembly response to selected acceleration and deceleration events.

Electronic Module Durability

Evaluate shock effects on mounting, connectors and internal electronics.

Shock Test Method Development

Study waveform repeatability and fixture behavior during test validation.

SpecificationDetails
ModelHST150/60 acceleration/deceleration dual shock tester
DriveProprietary servomotor shock actuation
Test modesAcceleration and deceleration shock
Acceleration shock magnitude1–50 G (published)
Acceleration shock duration5–100 ms (published)
Deceleration shock peak−150 G (published)
Deceleration shock pulse durationManufacturer listing reads “−11 ms”; physically treated as an 11 ms duration magnitude with sign clarification required
Deceleration methodProgrammer-mediated impact/deceleration
SLED-related operationSupported in manufacturer description
Shock waveform controlServo-based motion positioning and repeatability
Table size / payloadNot independently established for the dual-mode version; do not import impact-type HST Series ratings
Test standardsConfirm against selected test plan; no certificate or standard claim inferred

A pulse duration is not normally negative. Legacy manufacturer/Denkei text lists “-11ms”; this copy preserves the discrepancy in the specification note and does not imply a verified signed time. Confirm actual waveform, payload and fixture. Do not reuse HST Series impact-type specifications without confirmation.