Home » Electronic Measuring Instruments » DC & Precision Power Supplies » DC Power Supply » TEXIO PSW-A Series Multi-Range Programmable DC Power Supply

TEXIO PSW-A Series Multi-Range Programmable DC Power Supply

PSW-A Series Wide-Range Programmable DC Power Supplies

The TEXIO PSW-A Series combines a single-output, multi-range DC source with programmable voltage, current and power control for R&D, production, and automated testing.

Fifteen configurations pair five maximum-voltage families (30, 80, 160, 250 and 800 V) with three maximum output powers (360, 720 and 1080 W). A multi-range output characteristic lets a given model deliver more current at lower voltage within its rated power envelope.

CV, CC and CP operating behavior, voltage/current slew-rate control, internal output logging and remote interfaces support controlled evaluation of power electronics, LED loads and battery-related circuits. Model selection must consider the full voltage-versus-current operating curve, not just two maximum ratings.

15 Models5 voltage classes × 3 power classes
360–1080 WThree rated output-power choices
30–800 VFive upper-voltage classes
USB + LANStandard digital interfaces

The PSW-A family incorporates data logging, power limiting, tracking undervoltage protection and fan-stop functions as standard features. Test configuration and optional factory functions should be verified for the selected model.

Select up to two identical units in series for 30, 80 or 160 V models, or up to three identical units in parallel where the manufacturer’s connection rules are followed.

Fifteen Output Configurations

Choose 360 W, 720 W or 1080 W in 30 V, 80 V, 160 V, 250 V and 800 V maximum-voltage families.

Multi-Range Constant-Power Envelope

Operate across a wider voltage/current range than a fixed V/I rectangle while remaining within the selected model’s rated power.

CV / CC / CP Operation

Voltage, current and power settings enable constant-voltage, constant-current and constant-power operating behavior according to connected load.

Built-In Output Logging

Standard logging captures voltage, current and status data; recording intervals can be adjusted from 0.1 s to 999.9 s.

LAN, USB and Analog Control

Standard LAN, USB and analog control interfaces aid bench integration; GP-IB and RS-232C use separately ordered adapters.

Series / Parallel Expansion

Up to two compatible identical units in series (30/80/160 V families only), or three identical units in parallel, subject to connection conditions.

Power Electronics Development

Supply adjustable DC rails for evaluating power converter stages and control electronics within appropriate ratings.

LED Driver Evaluation

Use CV/CC priority and programmable output behavior to exercise LED drivers and associated circuitry.

Battery-Related Circuit Testing

Evaluate chargers, management circuits and other DC equipment using suitable battery-emulation or current-limiting setups.

Automated Production Testing

Control voltage and current through LAN/USB or analog signals in repeatable functional and acceptance tests.

High-Voltage DC Bench Tests

Choose 250 V or 800 V models for compatible high-voltage components with appropriate guarding and safety procedures.

Data Logging and Verification

Record output voltage, current and status for troubleshooting, test repeatability and engineering documentation.

PSW-A Series Specifications

Source topologySingle-output, multi-range programmable switching DC power supply
Model count15 models across five voltage classes and three power classes
Maximum rated voltage options30 V / 80 V / 160 V / 250 V / 800 V
Rated output power360 W / 720 W / 1080 W
Operating modesCV (constant voltage), CC (constant current), CP (constant power)
Digital / analog interfacesUSB, LAN, analog control: standard; GPIB and RS-232C: optional adapters
Standard logging interval0.1 to 999.9 seconds; internal storage for 8,000 records per manufacturer
Test and protection functionsOutput power limit, adjustable slew rate, tracking UVP, fan-stop, OVP/OCP/OTP and related protection
Series operationUp to 2 identical compatible units for 30/80/160 V families; not for 250 V or 800 V
Parallel operationUp to 3 identical compatible units
AC supply100 to 240 V AC worldwide input
Optional factory functionsSolar array simulation (YS); high-resolution logging / integration functions (Y1A), subject to option compatibility

Output voltage and current maxima are independent endpoints of a constant-power operating envelope, not simultaneously available maxima. Review the official operating-area chart and model-specific datasheet.

PSW-A Fifteen-Model Comparison

Model Rated Power Max. Voltage Max. Current
PSW-360L30A360 W30 V36 A
PSW-720L30A720 W30 V72 A
PSW-1080L30A1080 W30 V108 A
PSW-360L80A360 W80 V13.5 A
PSW-720L80A720 W80 V27 A
PSW-1080L80A1080 W80 V40.5 A
PSW-360M160A360 W160 V7.2 A
PSW-720M160A720 W160 V14.4 A
PSW-1080M160A1080 W160 V21.6 A
PSW-360M250A360 W250 V4.5 A
PSW-720M250A720 W250 V9 A
PSW-1080M250A1080 W250 V13.5 A
PSW-360H800A360 W800 V1.44 A
PSW-720H800A720 W800 V2.88 A
PSW-1080H800A1080 W800 V4.32 A

The voltage and current columns show separate maximum ratings. Example: PSW-360L30A supports 30 V/12 A or 10 V/36 A, not 30 V at 36 A. Consult the model’s multi-range operating curve before configuring the supply.


Connections, Accessories and Product-Line Positioning

Power envelope: At maximum current, available voltage is lower than the model’s maximum voltage rating. The output rating should not be interpreted as a rectangular voltage × current region.

Remote communication: LAN, USB and analog control are standard. TEXIO lists GUG-001 (GP-IB) and GUR-001B (RS-232C) as separate adapters.

Related product: Position the PSW-A alongside Denkei’s TEXIO PDW Series. The PSW-A is not described as a multiple-output source.

Catalog: The manufacturer provides an English PSW-A catalog; verify and attach the appropriate file to the existing product-page catalog CTA.