TOKYO KEIKI SR4030T / SR7030T Shielding Tent

SR4030T / SR7030T 30 GHz RF Shielding Tents

TOKYO KEIKI SR4030T and SR7030T shielding tents provide reconfigurable RF-isolated workspaces for 5G, wireless equipment development, and interference-controlled testing.

SR4030T is a single-layer tent with at least 40 dB specified attenuation from 150 kHz to 30 GHz. SR7030T is a double-layer design with at least 70 dB specified attenuation from 500 kHz to 30 GHz. The frequency bands and attenuation values must not be interchanged.

The pipe-suspended configuration can be assembled and moved without special tools and folded for storage when not in service. Standard footprint choices range from 1,500 × 1,000 mm to 4,000 × 4,000 mm, with 2,000 or 3,000 mm nominal tent height.

Optional power filtering, ventilation, lighting, signal feedthroughs, and RF absorbers can be selected for the intended measurement setup. Shielding attenuation is not an anechoic-chamber specification; RF absorber performance and facility-level test compliance require separate engineering.

30 GHzUpper frequency of specified shielding bands
≥40 dBSR4030T at 150 kHz–30 GHz
≥70 dBSR7030T at 500 kHz–30 GHz
10 Standard FootprintsMultiple widths, depths, and height options

Two Shielding Grades

Select single-layer 40 dB or double-layer 70 dB minimum shielding attenuation.

30 GHz Frequency Coverage

Supports high-frequency isolation planning for modern wireless testing.

Tool-Free Assembly

Pipe-hung design allows installation and relocation without special tools.

Foldable Construction

Store the enclosure compactly when temporary testing is finished.

Flexible Footprint

Ten published standard width/depth configurations, with two listed height choices.

Configurable Accessories

Add power-line filtering, airflow, lighting, and RF absorption as required.

5G Wireless Device Evaluation

Provide a controlled RF environment for equipment prototypes and lab assessment.

EMI Troubleshooting

Reduce external RF coupling while examining interference-sensitive products.

RF Module Integration

Support development of radios, receivers, transmitters, and antenna electronics.

Temporary RF Test Labs

Create portable or relocatable shielding for short-term programs.

Electronics Production QA

Separate test stations from ambient RF disturbances where the setup requires isolation.

Absorber-Assisted Test Setups

Use optional RF absorbers for low-reflection applications when properly designed and qualified.

SpecificationDetails
Enclosure constructionPipe-hung shielding tent
InstallationSpecial tools not required for standard assembly
Published footprint choices10 width × depth combinations
Standard heights2,000 or 3,000 mm
Standard entrance850 W × 1,765 H mm (zipper opening)
Entrance installation constraintWall width ≥1,500 mm
Available optionsPower filters, ventilation, lighting, communication fittings, RF absorbers
Non-standard sizesConsult manufacturer

Model / Detector Comparison

ModelConstructionSpecified minimum shielding attenuationShielding frequency range
SR4030TSingle-layer tent≥40 dB150 kHz–30 GHz
SR7030TDouble-layer tent≥70 dB500 kHz–30 GHz

Standard Tent Dimensions

Standard width × depthHeight choices
1,500 × 1,000 mm2,000 / 3,000 mm
1,500 × 2,000 mm2,000 / 3,000 mm
1,500 × 3,000 mm2,000 / 3,000 mm
1,500 × 4,000 mm2,000 / 3,000 mm
2,000 × 2,000 mm2,000 / 3,000 mm
2,000 × 3,000 mm2,000 / 3,000 mm
2,000 × 4,000 mm2,000 / 3,000 mm
3,000 × 3,000 mm2,000 / 3,000 mm
3,000 × 4,000 mm2,000 / 3,000 mm
4,000 × 4,000 mm2,000 / 3,000 mm

Manufacturer attenuation figures apply to different lower frequency limits. Shielding tents are not automatically anechoic test chambers. Any site-specific EMC/antenna compliance claims require validation of the installed setup.