High-Speed Large-Area DLP Ceramic 3D Printing for Mass Production
The SHASHIN KAGAKU SZ-6000 is a mass-production-oriented DLP ceramic 3D printer designed for high-speed, large-area batch production while maintaining high-definition drawing quality.
A newly developed DLP multi-scan method provides exposure times up to ten times faster than SHASHIN KAGAKU's conventional model. The system combines 21.6 µm dot resolution with a 0.9 µm drawing control pitch and a large 600 × 600 × H300 mm printing area.
Up to 10× Faster
High-speed DLP multi-scan exposure
600 × 600 × 300 mm
Large-area batch printing
21.6 µm Dot
High-definition printing resolution
0.9 µm Pitch
Fine drawing control pitch
High-Speed DLP Multi-Scan
A newly developed DLP multi-scan method provides exposure times up to ten times faster than SHASHIN KAGAKU's conventional model.
Large-Area Batch Production
The 600 × 600 × H300 mm printing area supports high-volume simultaneous ceramic 3D printing in batches.
21.6 µm Dot Resolution
High-definition drawing is supported by a specified dot resolution of 21.6 µm.
0.9 µm Drawing Control Pitch
A 0.9 µm drawing control pitch supports fine control during large-area ceramic printing.
Automatic Slurry Replenishment
An external large-capacity automatic slurry replenishment unit supports long-duration continuous operation without running out of material.
Print Surveillance Cameras
Integrated surveillance cameras are provided to monitor defects during the 3D printing process.
Slurry Recovery & Blade Cleaning
Blade cleaning and surplus slurry recovery functions support effective use of remaining printing material.
Green Body Conveying Table
A conveying table supports smooth transfer of the printed green body from the printing stage to the cleaning process.
| Model | SZ-6000 |
|---|---|
| Model Positioning | Mass-Production Model |
| Printing Method | DLP Multi-Scan |
| 3D Printing Area | 600 × 600 × H300 mm (70 kg) |
| Layer Pitch | 10–200 µm |
| 3D Printing Resolution | Dot 21.6 µm / Drawing pitch 0.9 µm |
| Equipment Size | 1720 × 2950 × H1870 mm |
| Power Supply | Single-phase 200 V AC, 30 A |
Electric & Electronic Parts
Ceramic structures for circuit patterns, heat dissipation parts, antennas, sensor holders, flow passages, and functional electronic components.
Biological & Medical Systems
Ceramic 3D printing for applications including crowns and implants, artificial bones, cell culture base materials, filters, and insulating components.
Energy & Environmental Systems
Complex ceramic structures for filters, CO₂ absorption filters, small fuel cells, catalysts, and internal flow-passage applications.
Mechanical & Heat Dissipation Parts
Prototype and small-lot ceramic components including heat-resistant parts, mechanical structures, sintering setters, turbines, and heat dissipation components.
Biomimetic Structures
Complex ceramic geometries inspired by biological structures for lightweight, high-strength, non-reflective, curved, and flow-control applications.
Custom & One-of-a-Kind Parts
Custom ceramic structures, filters, integral objects, moving structures, accessories, and other designs that benefit from additive manufacturing freedom.
| Model | Standard model SZ-6000 |
| 3D printing area | 600 × 600 × H300mm (70kg) |
| Layer pitch | 10~200µm |
| Spot diameter | - |
| 3D Printing Resolution | Dot 21.6µm/Drawing pitch 0.9µm |
| Output power | - |
| Equipment size | 1720 × 2950 × H1870mm |
| Power supply | Single-phase 200V AC 30A |