Home » Electronic Measuring Instruments » Sound & Vibration Measurement » Sound Level Meter » RION NL-43 / NL-53 / NL-63 Sound Level Meters

RION NL-43 / NL-53 / NL-63 Sound Level Meters

RION NL-43 / NL-53 / NL-63 Sound Level Meters

Class 1 and Class 2 sound level meters for environmental noise, industrial acoustics and low-frequency measurement, with remote monitoring capability.

The RION NL-43, NL-53 and NL-63 sound level meters help users document sound levels in factories, worksites, environmental surveys and research programs. Each model features a color touchscreen, LAN-based browser access and SD-card data recording, with distinct precision classes and measurement capabilities.

Choose the NL-43 for IEC 61672-1:2013 Class 2 field measurements, or the NL-53 for Class 1 noise assessment. The NL-63 is also a Class 1 instrument, adding measurement of low-frequency sound from 1 Hz and G-weighted measurements for infrasound-related studies.

The family can measure up to four different frequency/time-weighting condition sets simultaneously using one sound input. This is not a four-microphone input system. FFT analysis, octave/one-third-octave analysis and waveform recording require appropriate optional software programs, and some NL-43/NL-53 functions require the NX-43EX extended program. Confirm accessories and applicable local standards for a proposed measurement.

Class 1 / 2NL-53 and NL-63: Class 1; NL-43: Class 2
From 1 HzLow-frequency sound measurement: NL-63 only
4 settingsSimultaneous measurement condition sets
LAN + SDWeb-browser remote access and recording

Three Model Choices

Select Class 2 NL-43, Class 1 NL-53 or low-frequency Class 1 NL-63.

Four Condition Sets

Capture up to four measurement configurations with different weighting characteristics from one microphone.

LAN Remote Monitoring

Use a compatible web browser to inspect levels and control supported measurements over a network.

Touchscreen Operation

A color touchscreen supports field setup while physical keys handle essential controls.

SD-Card Recording

Store time histories and calculated sound levels for subsequent review and reporting.

Expandable Acoustic Analysis

Add compatible optional waveform, FFT and octave-analysis programs when required.

Factory Noise Surveys

Assess machinery and plant environmental sound levels.

Community Environmental Monitoring

Document neighborhood and boundary noise conditions.

Low-Frequency Sound Investigation

Use the NL-63 for G-weighted measurements and sound content from 1 Hz.

Construction-Site Assessments

Collect environmental sound data at temporary work areas.

Equipment Noise Verification

Check sound emissions during testing and quality assurance.

Long-Term Remote Sound Monitoring

Monitor trends through LAN connectivity and stored data.


Specification NL-43 NL-53 NL-63
Sound level meter classClass 2Class 1Class 1
IEC 61672-1:2013 classificationClass 2Class 1Class 1
Low-frequency measurement from 1 HzNot designatedNot designatedYes; including G-weighting
Four weighting-condition measurement setsYesYesYes
Color touchscreen / LANYes / YesYes / YesYes / Yes
SD-card recordingSupportedSupportedSupported
Octave/1/3-octave analysisOptional NX-43RT with required softwareOptional NX-43RT with required softwareOptional NX-63RT

Specification Details
Measurement inputOne microphone per instrument; up to four simultaneously evaluated weighting-condition settings
NetworkBuilt-in LAN terminal with browser-based access
External power and communicationUSB Type-C connector for power and communication, subject to compatible equipment
StorageSD card; manufacturer describes up to 1,000 hours under specified logging conditions
Advanced programsNX-43EX, NX-43WR, NX-43FT, NX-43RT or NX-63RT as applicable; sold separately
Applicable standardsIEC 61672-1:2013 (Class 1 or 2 as listed by model); confirm local regulatory requirements

The four simultaneous measurement settings do not represent four separate acoustic input channels. Only NL-63 is designated for 1 Hz low-frequency and G-weighted measurements. Optional NX-43EX can be required for certain functions on NL-43/NL-53; analysis modules, microphones, calibration and application-specific accessories must be specified for the exact model.